Re: astable 555


<ejleiss@xxxxxxxxxxxxxxxx> schreef in bericht
news:1181763994.494819.218280@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
On Jun 13, 2:08 pm, John Fields <jfie...@xxxxxxxxxxxxxxxxxxxxx> wrote:
On Wed, 13 Jun 2007 09:53:34 -0700, ejle...@xxxxxxxxxxxxxxxx wrote:
I am trying to trigger an astable 555 oscillator using another 555 in
the monostable mode. Everything I see says that the astable 555 is
free-running. Is there a way to trigger it using the monostable?

--- _____
Connect the output of the monostable to the RESET input of the
astable. The astable will run while the monostable's output is
high.

--
JF

I have a board that inputs 8 pulses to a counter and after the 8th
count it is to trigger a one-shot 555 which will start a delay for
about a min. Then the one shot needs to trigger the oscillator after
the delay.


Your description is fully unclear (to me).
What do you mean by "trigger the oscillator"?
Is the oscillator is supposed to run until the monostable starts and run
again when the monostable has timed out? If not, what will stop the
oscillator and when?

petrus bitbyter


.

Relevant Pages

  • Re: How to acquire an accurate delay time?
    ... >100MHz) and a counter to create the rough delay time and use the delay ... How to synchronize with the trigger signal? ... run an ECL delay-line oscillator. ... dual-rank synchronizer, clocked from a crystal oscillator, resulting ...
    (sci.electronics.design)
  • Re: astable 555
    ... On Jun 13, 4:33 pm, "petrus bitbyter" ... Is there a way to trigger it using the monostable? ... Then the one shot needs to trigger the oscillator after ... the delay. ...
    (sci.electronics.design)
  • Re: Startable Oscillator
    ... Not actually minimum delay, but a very precise delay. ... How about feeding the trigger directly to one input of a very fast XOR ... pulse to the 2.5 - 5 GHz oscillator tank circuit and the oscillator ...
    (sci.electronics.design)
  • Re: astable 555
    ... Then the one shot needs to trigger the oscillator ... after the delay. ... just written then go back to your lecture notes and look for 'AND ...
    (sci.electronics.design)
  • Re: astable 555
    ... Is there a way to trigger it using the monostable? ... Then the one shot needs to trigger the oscillator after ... the delay. ...
    (sci.electronics.design)
Quantcast