Re: OT: Norton GhostPE 2001 problem
- From: D from BC <myrealaddress@xxxxxxxxx>
- Date: Wed, 20 Jun 2007 04:26:15 GMT
On Tue, 19 Jun 2007 18:27:45 GMT, Robert Baer
<robertbaer@xxxxxxxxxxxxx> wrote:
[snip]
I do not really "need" re-sizing; i could use Ghost or DriveImage
True..I don't recall Acronis automatically resizing partitions so it's
generated image file can fit perfectly. A partition has to be defined
first by a partitioning app.
I only know raid 1 mirroring and disk imaging apps (Ghost, Acronis
Drive Image) for "photocopying" drives or partitions.
I know little about MFT..
Maybe try Norton tools???
In the past I've used disk checking programs from Maxtor.
Hard drive company's might be putting out their own diagnostic
utilities.
D from BC
(20Gbyte to 40Gbyte HD) for that, then Acronis (if it will do a COPY)
for 40Gbyte-40Gbyte "backup" copying.
You seem to imply that Acronis might be able to do a copy if and only
if the destination drive was previously partitioned to match the source.
I find that strange as all heck, because writing a drive does
over-write what was there; at worst one would have (in my case) the
first 20Gbytes copied to the first 20Gbytes of a blank HD with the
remaing 20Gbytes untouched.
Space is needed for the Acronis image file.
Also space is needed when Acronis extracts this image file.
The destination partition must be equal to or greater than the
extracted image file. All contents in the partition get wiped out*.
For example:
Acronis extracted a 7Gig image file onto my 10G partition.
D from BC
.
- Follow-Ups:
- Re: OT: Norton GhostPE 2001 problem
- From: Robert Baer
- Re: OT: Norton GhostPE 2001 problem
- References:
- Re: OT: Norton GhostPE 2001 problem
- From: Robert Baer
- Re: OT: Norton GhostPE 2001 problem
- From: D from BC
- Re: OT: Norton GhostPE 2001 problem
- From: Robert Baer
- Re: OT: Norton GhostPE 2001 problem
- From: D from BC
- Re: OT: Norton GhostPE 2001 problem
- From: Robert Baer
- Re: OT: Norton GhostPE 2001 problem
- From: D from BC
- Re: OT: Norton GhostPE 2001 problem
- From: Robert Baer
- Re: OT: Norton GhostPE 2001 problem
- From: D from BC
- Re: OT: Norton GhostPE 2001 problem
- From: Robert Baer
- Re: OT: Norton GhostPE 2001 problem
- Prev by Date: Re: DIY CNC Machine How Hard Can It Be?
- Next by Date: Re: DIY CNC Machine How Hard Can It Be?
- Previous by thread: Re: OT: Norton GhostPE 2001 problem
- Next by thread: Re: OT: Norton GhostPE 2001 problem
- Index(es):
Relevant Pages
|