Re: Simple mosfet question

On Thu, 02 Aug 2007 19:37:23 -0400, default wrote:

On Thu, 02 Aug 2007 19:02:42 -0000, Andrew <xxragexx@xxxxxxxxx> wrote:


Oh sorry, I guess my wording was misleading. Yes it is a servo motor
driver that is intended to drive an RC servo motor, but instead, it is
driving my circuit. There is no servo motor.

Well that doesn't sound too bad. RC servo is something like a one
millisecond pulse (if my memory is working) that is pulse position
modulated.

The RF modulation is PPM, but the signal between the receiver and
servo is PWM, with a 1500us pulse corresponding to neutral. The pulse
frequency isn't significant.

.

Relevant Pages

  • Re: Choosing RC Servo Controller
    ... They're talking about Pulse PHASE Modulation, ... control input of the servo motor. ... and fed the different PWM signals to the servo motors, ...
    (sci.electronics.design)
  • Servo Issue
    ... going to be simple) task of controlling a servo motor with an AVR ... 1-2ms pulse every 20+-ms (according to the specs the motor's I've got ...
    (sci.electronics.design)
  • Re: Simple mosfet question
    ... I guess my wording was misleading. ... driver that is intended to drive an RC servo motor, but instead, it is ... millisecond pulse that is pulse position ...
    (sci.electronics.design)
Quantcast