Re: CD4060 oscillator, max resistor value

On Tue, 07 Aug 2007 13:33:51 -0700, Jim Thompson
<To-Email-Use-The-Envelope-Icon@xxxxxxxxxxxxxxx> wrote:

On Tue, 07 Aug 2007 13:17:05 -0700, Joerg
<notthisjoergsch@xxxxxxxxxxxxxxxxxxxxx> wrote:

Jim Thompson wrote:

On Tue, 07 Aug 2007 19:14:23 GMT, Joerg
<notthisjoergsch@xxxxxxxxxxxxxxxxxxxxx> wrote:


Jim Thompson wrote:


On Sat, 4 Aug 2007 13:01:46 -0700, "RST Engineering \(jw\)"
<jim@xxxxxxxxxxxxxxxxxx> wrote:



I've found that a trip through the pots'n'pans cycle on the dishwasher set
to "warm" works well with about five or six drops of liquid hand soap in the
soap dispenser. Let it dry for a couple of days in the shade on a hot day
and away you go.

Do NOT dry in the direct sun or the warped parts won't fit together too
well.

Jim


Feh? Keyboards are so cheap. How can you afford the time to
disassemble?


Here's a calc for my keyboard repair:

Drive to store: 25 min.
Time to find keyboard there: 5 min.
Wait in cashier's line: 5 min.
Drive back to office: 25 min.
Grand Total ---> 60 min.

in contast to

Get Philips screwdriver from lab: 1 min.
Take it all apart: 2 min.
Step outside and shake coarse stuff out: 2 min.
(make sure wife doesn't see that...)
Hose it all off, scrub a bit where it's nasty: 10 min.
Put it all back together: 10 min.
Grand Total ---> 25 min.

Ok, method 2 doesn't include a few hours of drying time but my services
are not needed for that, it all just sits there in the toasty garage
while I work, walk the dogs, whatever.


Open closet. Pick one off the top of the stack. Plug in.


I guess N. is more tolerant with respect to "packratism" than M. I would
not get away with such a stack.

It's MY closet, in MY office ;-)

...Jim Thompson


There you go. I have two rooms (one big, one huge) that are 100% that
way. They have doors, if anyone doesn't like the way they look. ;-)

Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
speff@xxxxxxxxxxxx Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
.

Relevant Pages

  • Re: CD4060 oscillator, max resistor value
    ... to "warm" works well with about five or six drops of liquid hand soap in the ... Do NOT dry in the direct sun or the warped parts won't fit together too ... Time to find keyboard there: ... Pick one off the top of the stack. ...
    (sci.electronics.design)
  • Re: CD4060 oscillator, max resistor value
    ... to "warm" works well with about five or six drops of liquid hand soap in the ... Do NOT dry in the direct sun or the warped parts won't fit together too ... Time to find keyboard there: ...
    (sci.electronics.design)
  • Re: CD4060 oscillator, max resistor value
    ... to "warm" works well with about five or six drops of liquid hand soap in the soap dispenser. ... Do NOT dry in the direct sun or the warped parts won't fit together too well. ... Keyboards are so cheap. ... Pick one off the top of the stack. ...
    (sci.electronics.design)
  • Re: Writing has become physically painful :(
    ... I've used a split keyboard and it seemed to be easier - but then I ... Take it out about halfway through the dry cycle ... residues from the water hanging around under the keys or in the basic ... Keys getting mixed up. ...
    (rec.arts.sf.composition)
  • Re: Writing has become physically painful :(
    ... I've used a split keyboard and it seemed to be easier - but then I ... spilt coffee on it and now I'm back with a flat one, ... Take it out about halfway through the dry cycle ... Keys getting mixed up. ...
    (rec.arts.sf.composition)