I have a mobile DVR that is attached to my motocross bike, and the
bolts that hold the pcb inside the enclosure are coming loose because
of nasty vibrations. The screws are very small 2mm, can i use loctite
on them and will i be able to remove later if need be? thanks!
Re: Loose Jag IRS Diff Bolts(?) ... >- so figuring this must be loose diff bolts I've taken out the IRS ... the diff doesn't seem very loose (although I'm ... Other things to look for are axial play on the diff output shafts... (uk.rec.cars.classic)
Re: Stiff steering - not exactly ... >>hold the steering rack to the frame were loose. ... it would suck to have the rack come loose.... It wasn't my car that had loose bolts, in fact I think it was a discussion I ... (alt.autos.toyota)
Re: Today was a good day... ... I was miles away from home or work. ...loose, but not this loose. ... How fucking stupid did I feel, but very glad it wasn't as expensive as ... Do they always shake the bolts loose so regularly? ... (uk.rec.motorcycles)
Re: Heating rusty bolts ... I've seen some impossible to move nuts and bolts easily removed after ... steering knuckle that won't come loose.... and strike them a sharp blow with a hammer. ...necessary tool to have. ... (rec.autos.tech)
Re: Not OK to use tranny bolt for ground? ... should NOT use a tranny bolt for a ground. ... If you loose a good ground ... connection in the chassis the player becomes the next convenient place for ... have you seen loose tranny bolts very often? ... (alt.guitar.amps)
