LCD display controller

Hi everyone,
I have recently bought some LCD STN
displays with resolution of 640 x 480 x 3 bpp (bit per
pixel -> R, G, B, 1 bit each). It should display a full
range of 8 colours (shouldn't it?).

The problem concerns the display controller because
I cannot find a suitable one.

I need help, please.

Regards


.

Relevant Pages

  • Re: LCD display controller
    ... I have recently bought some LCD STN ... pixel -> R, G, B, 1 bit each). ... The problem concerns the display controller because ...
    (sci.electronics.design)
  • Re: Algorithm for "Windows Center" and "Windows Width"
    ... y represents the output display level. ... For 16 bit pixel values, you have a potential range of 65536 values but you have only a display range of 256 values, so some manipulation must be done. ... As an extra challenge for you, I think you will find that performing this calculation for every pixel everytime the user changes the window settings will make your application run very slowly. ... identity (no rescale values or Modality LUT, ...
    (comp.protocols.dicom)
  • Re: Ok First question about XP Pro
    ... if you Run a 1280 x 1024 LCD Display ... at 1024 x 768 that means that each Pixel on the ... Resolution you want & it will support), a CRT Monitor has a "Native ...
    (uk.people.silversurfers)
  • Re: HDMI - still confused
    ... you have pixel resolutions of 1920x1080 ... Most DVD players and Set Top Boxes ... be scaled up or scaled down by the STB as necessary before output. ... Ideally a display would be provided the native compressed bit-stream, ...
    (alt.tv.tech.hdtv)
  • Re: [OT?] Refresh rates for LCD screens?
    ... >My model for CRT displays has a display processor scanning through ... In the case of LCD screens, there is local memory *in the LCD ... controller* to remember the state of every pixel in the screen. ... LCD controller, and then driving the LCD panel itself. ...
    (sci.image.processing)