Re: Pinout help for DPM
- From: Jamie <jamie_ka1lpa_not_valid_after_ka1lpa_@xxxxxxxxxxx>
- Date: Sun, 07 Oct 2007 17:55:34 -0400
Tim Williams wrote:
So Does anyone have any data?...Pretty please?Sounds like a special edition run for an OEM.
Tim
--
Deep Fryer: A very philosophical monk.
Website @ http://webpages.charter.net/dawill/tmoranwms
"Tim Williams" <tmoranwms@xxxxxxxxx> wrote in message
news:IiSNi.48$H02.11@xxxxxxxxxxxxxxx
I hold here a Digitec 2611-27X. It's old enough that it has linear power
supplies and a VFD. I get very few hits pertaining to the 2611 series on
Google, and literally *nothing* on the -27X specifically.
Surely one of you old fogies has something in your file to help?
Tim
--
Deep Fryer: A very philosophical monk.
Website @ http://webpages.charter.net/dawill/tmoranwms
you'll find that in a lot of cases.
it most likely is the same as one of their
generic runs only with out something like the
name tag in front etc..
Zumbach was good for this. We were able to get
the exact replacement 4.5 digit replacement from the
original manufacture using their part number ordering
system.
the Zumbach number is on their records and ends up
crossing over to the combination we ordered.
Other than that, have fun.
--
"I'm never wrong, once i thought i was, but was mistaken"
Real Programmers Do things like this.
http://webpages.charter.net/jamie_5
.
- References:
- Pinout help for DPM
- From: Tim Williams
- Re: Pinout help for DPM
- From: Tim Williams
- Pinout help for DPM
- Prev by Date: Re: Stupid polarized capacitor tricks
- Next by Date: Re: Randy chalenges speaker cable manufacturer
- Previous by thread: Re: Pinout help for DPM
- Next by thread: 8-wire stepper motor
- Index(es):
Relevant Pages
|
