Re: 1mm pins -- through-hole or SMT?

On Mon, 22 Oct 2007 11:42:39 -0700, malak@xxxxxxx wrote:

On Oct 22, 12:23 pm, Spehro Pefhany
<speffS...@xxxxxxxxxxxxxxxxxxxxxxx> wrote:

Sure looks like an SMT part to me.

Can SMT parts have vertical pins on the bottom?

I see two locating pins (non electrical) and solder tabs to hold it
mechanically. The memory card is held parallel to, and a few mm above,
the PCB.

Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
speff@xxxxxxxxxxxx Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
.

Quantcast