Re: PCBs with multiple colors of silkscreen/solder mask?

In article <1193762121.733171.134620@xxxxxxxxxxxxxxxxxxxxxxxxxxx>,
Michael <nleahcim@xxxxxxxxx> wrote:

Hi there - recently a rep brought by a PCB that was showing off one of
their connectors. On the back of it there was some silkscreen
describing the connector and giving some other information. What
caught my eye was that the silkscreen was in something like 3 or 4
colors! Has anybody ever seen this before? Is it common for a PCB fab
to be able to do this? Is it very expensive?

More likely the additional colors would be done at a silk-screen shop,
since the average PCB fab house seems to generally silk screen in any
color you like so long as it's white.

--
Cats, coffee, chocolate...vices to live by
.

Relevant Pages

  • Re: How to control connector angle
    ... Michael wrote: ... > I found myself a shortcut using ShapeRouteStyle of the connector, play ... >>> The connectors are set to route freely. ...
    (microsoft.public.visio.developer.vba)
  • Re: CPU Temp Too High on P5LD2 Deluxe
    ... Thanks for the reply, Michael. ... connectors are tight, I had this problem the first time with a socket 775 motherboard. ... The second problem I had was that the CPU was too close to the power supply in the case, less than an inch between them. ... A lot of heat was being dumped into the power supply and I could feel the heat through the side of the case. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: How to control connector angle
    ... I found myself a shortcut using ShapeRouteStyle of the connector, play ... use 18 or 20 for simple horizontal connectors ... and 21 or 22 for horizontal - vertical connectors ... Michael ...
    (microsoft.public.visio.developer.vba)