Re: Different Phase Shift Oscillator


"The Phantom"

The usual phase shift oscillator with 3 CR sections needs a gain of 29 to
oscillate. Here is one that only needs a gain of 12:

http://www.digital.ee.eng.chula.ac.th/2102384/download/OSC.pdf

Is the author correct about the required gain?



** The link does not say what you claim.

Yawn .......




........ Phil






.

Relevant Pages

  • Different Phase Shift Oscillator
    ... The usual phase shift oscillator with 3 CR sections needs a gain of 29 to ... Is the author correct about the required gain? ...
    (sci.electronics.design)
  • Re: Different Phase Shift Oscillator
    ... oscillate. ... Is the author correct about the required gain? ... For a large number of sections and omega << 1/RC, the phase angle is -N omega RC. ... you can make a phase shift oscillator with any gain above 1. ...
    (sci.electronics.design)
  • Re: More ugly xfer function
    ... >The Phantom wrote: ... The amplifier has a gain of k. ... >trick again. ...
    (sci.electronics.design)
  • Wes Dooleys preamp with 84db of gain?
    ... Did anybody hear/see Wes Dooley's new stereo preamp made for ribbon ... (no phantom, ha ha ha). ... Apparently it has a lot of gain. ...
    (rec.audio.pro)
  • Re: plugging a microphone into a soundcard line input ?
    ... a ribbon mic t.bone RB500 who doesn't need phantom ... power. ... i'll be recording drums so i don't really need to boost the ... Set the gain for -10 dBV and see what kind of level you get ...
    (rec.audio.pro)