Re: Prototyping?

On Wed, 31 Oct 2007 04:39:29 +0000, Joerg wrote:
Rich Grise wrote:
On Tue, 30 Oct 2007 17:23:15 -0700, Joerg wrote:
Rich Grise wrote:
On Tue, 30 Oct 2007 13:46:03 -0700, John Larkin wrote:
I wish I could buy gold-plated copperclad... the copper looks great
when you start, but goes to hell in a few days. Hey, maybe a pcb house
would plate some copperclad for us. THAT would look classy.
Clean and shine it with Brasso, rinse well, rinse with isopropyl, rinse
with acetone (if you don't have any aceton-vulnerable parts), dry
thoroughty, and spray with Krylon.
That'll leave an awful stench next time you make a change.

The krylon is acrylic - it should come right off with a little acetone
or ethyl acetate. :-)

Yeah but who does that? People realize that R13 should really have been
to GND instead of Vref, flick on the Weller switch, phsssst ... "Hey,
Leroy, did your stogie roll onto the carpet again?"

Well, I wouldn't expect you to take a prototype that's not even done
yet, and dress it up for presentation! You don't lacquer it until it's
ready to go on display, silly. ;-)

Cheers!
Rich

.

Relevant Pages

  • Re: Prototyping?
    ... would plate some copperclad for us. ... Clean and shine it with Brasso, rinse well, rinse with isopropyl, rinse ... with acetone, ... "Hey, Leroy, did your stogie roll onto the carpet again?" ...
    (sci.electronics.design)
  • Re: Prototyping?
    ... would plate some copperclad for us. ... Clean and shine it with Brasso, rinse well, rinse with isopropyl, rinse ... with acetone, ... "Hey, Leroy, did your stogie roll onto the carpet again?" ...
    (sci.electronics.design)
  • Re: Prototyping?
    ... Clean and shine it with Brasso, rinse well, rinse with isopropyl, rinse ... The krylon is acrylic - it should come right off with a little acetone ...
    (sci.electronics.design)
  • Re: Prototyping?
    ... Hey, maybe a pcb house ... Clean and shine it with Brasso, rinse well, rinse with isopropyl, rinse ... to fit 6 mbits of fpga config plus the application ... code into a 4 mbit eprom. ...
    (sci.electronics.design)
  • Re: PVC damage on silver proofs?
    ... After the rinsing you will be able to see if any other ... They can be use with the plastic 2x2s and with coins in capsules. ... I tried the acetone rinse and it has ...
    (rec.collecting.coins)