Need engineer for hire
- From: Michael Brown <mikeb@xxxxxxxxxxxxxx>
- Date: Sat, 24 Nov 2007 10:23:40 -0800 (PST)
Hey all... I figured this was a good place to start.
I'm looking for someone who can take on a project for my company, to
design a very accurate PTZ mount for a small camera. The mount will
need to have a resolution of around 100,000 steps (0.0036 degrees per
step), and high accuracy positioning (repeatably it should go to the
same exact spot when it's told to via serial/network communication
interface). The camera weight will be around 1lb, so it doesn't have
to be too heavy duty. It also needs to maintain a minimum speed of 60
deg/s for movement (ideal is 100-120 deg/s).
Anyone interested in a project like this? I can provide more details
to those interested in the project. It needs to be developed as a low
cost mount, I can elaborate on what low cost means in an email.
Anyways, thanks guys - looking forward to hearing from some talented
hackers :P
.
- Follow-Ups:
- Re: Need engineer for hire
- From: Vladimir Vassilevsky
- Re: Need engineer for hire
- From: Jeff Liebermann
- Re: Need engineer for hire
- From: john jardine
- Re: Need engineer for hire
- From: Nico Coesel
- Re: Need engineer for hire
- From: Paul Hovnanian P.E.
- Re: Need engineer for hire
- From: John Larkin
- Re: Need engineer for hire
- Prev by Date: Re: Herd instincts?
- Next by Date: Re: Herd instincts?
- Previous by thread: Over 10dB noise reduction at 300MHz
- Next by thread: Re: Need engineer for hire
- Index(es):
Relevant Pages
|
Loading
