Re: USB Microscope for PCB work
- From: miso@xxxxxxxxx
- Date: Thu, 6 Dec 2007 20:09:36 -0800 (PST)
On Dec 5, 6:07 am, "Joe G \(Home\)" <jo...@xxxxxxxxxxxxxxx> wrote:
Hi All,
I am looking for recommendations at indicative costs of a USB microscope to
assist in PCB smd hand assemble and re work etc....
All your comments appreciated.
Joe
Get real optics. I suggest the Bausch & Lomb Stereoview 3 (used
obviously)
Incidentally, the later models have a lot of plastic in the focus
mechanism, so the older 3 is considered the way to go.
Look for one with a heavy base and long arm. This way you can position
it over the PCB. Accessories for these microscopes are very expensive,
so consider that when you make your purchase.
.
- References:
- USB Microscope for PCB work
- From: Joe G \(Home\)
- USB Microscope for PCB work
- Prev by Date: Re: Question on small capacitors...
- Next by Date: Re: LM211 internal hysteresis?
- Previous by thread: Re: USB Microscope for PCB work
- Next by thread: Re: USB Microscope for PCB work
- Index(es):
Relevant Pages
|
Loading
