Re: Toilet, Ipod, sad young lady



In article <b36c6$4765cb52$18d6b40c$15921@xxxxxxxxxxx>,
"amdx" <amdx@xxxxxxxxxxx> wrote:

My 16 year old daughter was cleaning the bathroom,
(what did I just say? pinch me, am I dreaming?)
Her Ipod got loose and landed in the toilet, she grabbed
it and rinsed it immediately. It worked for about two days
then went completely dead. If plugged into the charger the display says the
battery is dead and never changes from this display. (normally if the
battery was dead it
would say that, then after a few minutes it would display charging).
Anyway, any thoughts about cleaning any growths that may have shorted
connections, I don't see anything abnormal. Any solvent recommended? It's
dead I have nothing to lose.
Mike

You could try soaking in or opening it up and wiping with anyhydrous
alcohol, or the closest thing you can easily get, as that's sort of a
pain to find, and isn't anyhydrous anymore as soon as you break the seal
anyway...

91% or 99% isopropyl (91 is easier to find, 99 is better) Cheap, easy to
find at drugstore, my default electronics cleaning material.

Everclear (190 proof, aka 95%, ethyl) - far more expensive due to taxes
as drinking-grade.

Denatured alcohol - ethyl with some nasty crud added to keep you from
drinking it, cheap at the paint section of the hardware store.

IMO, don't use methyl, aka wood alcohol, or denatured ethyl which has
been denatured with methyl.

--
Cats, coffee, chocolate...vices to live by
.



Relevant Pages

  • GMCFESIL: (Guy Macons Cure For Electronics Soaked In Liquids)
    ... battery is dead and never changes from this display. ... looks like it might be damaged by water, ... Use a bottle or two of isopropyl alcohol to ...
    (sci.electronics.design)
  • Re: Irish Whiskey
    ... Was Jesus Christ addicted to alcohol? ... them going on that track they to bring up the water into the discussion. ... prayed for the dead guy until people arrived to help. ... struggling to understand why a guy my age should ride a motorcycle so ...
    (soc.culture.irish)
  • Re: Fluke 12 Multimeter Display Problem
    ... That is what I have done, but I use a special cleaning 100% alcohol ... I have a display problem. ... I've done this to my Fluke 77 twice in the 20 years I've ...
    (sci.electronics.repair)
  • Re: BK2000 trouble...
    ... My Black knight 2000 machine it's dead. ... bit cause i'm still looking for a complete display to come. ... Problem it's that i get no attract mode. ... I got the +5 volt led lit, and the diagnostic and the blanking led will lit ...
    (rec.games.pinball)
  • BK2000 trouble...
    ... My Black knight 2000 machine it's dead. ... bit cause i'm still looking for a complete display to come. ... Problem it's that i get no attract mode. ... I got the +5 volt led lit, and the diagnostic and the blanking led will lit ...
    (rec.games.pinball)