Re: putting a track on PCB?

From: Ajab <jasusvijay@xxxxxxxxx>
Date: Tue, 29 Jan 2008 09:11:50 -0800 (PST)

On Jan 29, 9:38 pm, John Larkin
<jjlar...@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

On Tue, 29 Jan 2008 05:57:02 -0800 (PST), Ajab <jasusvi...@xxxxxxxxx>
wrote:

Is there any way to put a copper track on ready PCBs?
any tools or any alternatives to avoid wires/jumpers without going for
re-design?

What's wrong with wire?

John

It shows up with wire.....i just need to make the change
invisible.... :)
.

Follow-Ups:
- Re: putting a track on PCB?
  - From: Ross Herbert
- Re: putting a track on PCB?
  - From: John Fields
- Re: putting a track on PCB?
  - From: TT_Man
- Re: putting a track on PCB?
  - From: Spehro Pefhany

References:
- putting a track on PCB?
  - From: Ajab
- Re: putting a track on PCB?
  - From: John Larkin

Prev by Date: Re: 8 Layer Board - Non-standard Stackup
Next by Date: Re: putting a track on PCB?
Previous by thread: Re: putting a track on PCB?
Next by thread: Re: putting a track on PCB?
Index(es):
- Date
- Thread

Relevant Pages

Re: putting a track on PCB?
... What's wrong with wire? ... the first time? ...
(sci.electronics.design)
Re: putting a track on PCB?
... Use wire the same color as your solder mask. ... Embedded software/hardware/analog Info for designers: http://www.speff.com ...
(sci.electronics.design)
Re: putting a track on PCB?
... On Jan 29, 9:38 pm, John Larkin ... Use wire, then wave a magic wand and say 'abracadabra' and the wire will ...
(sci.electronics.design)
Re: putting a track on PCB?
... any tools or any alternatives to avoid wires/jumpers without going ... for re-design? ... Use wire, then wave a magic wand and say 'abracadabra' and the wire ... hand-laying a copper trace on a PCB will be readily visible;it's just not ...
(sci.electronics.design)
Re: putting a track on PCB?
... Use wire the same color as your solder mask. ... Everybody uses kluge wires; ...
(sci.electronics.design)