Re: Contact Thermometer for Component Temperature
- From: Ecnerwal <LawrenceSMITH@xxxxxxxxxxxxxxxxxxxx>
- Date: Thu, 14 Feb 2008 01:41:38 GMT
In article <bl27r3hcs9g7c2doe470um4imobt16toun@xxxxxxx>,
D from BC <myrealaddress@xxxxxxxxx> wrote:
I've been looking around and haven't found it yet..
Where can I find a small temperature sensor on a long probe (like a
scope probe) to measure the temperature on 8pin SOIC chips and 1206
resistors?
The probe plugs in a DMM or similar readout.
Look for thermocouple probe. Some multimeters take one directly (mine
will work with Type K only).
ie, newport 48F5805 is a 48 inch type K with multimeter type plug
installed, for $13. Also says no longer available, but 7 in stock...
Stick it in a tube and it's a probe. Hot glue is your friend.
A rigid probe prebuilt would be (for example) 93F9285, at $30.
Sometimes you can find them in surplus.
You could also stick any of the TO92 devices (LM34, etc) on the end of a
stick/tube. Angle the mount on the stick so you can get the flat on the
flat of the case to be measured.
If you like you can simply buy the wire and weld it yourself to make
thermocouples. You can even get retro and use a bucket of ice and a
chart, instead of a meter to figure it all out for you and fake the
bucket of ice.
--
Cats, coffee, chocolate...vices to live by
.
- Follow-Ups:
- Re: Contact Thermometer for Component Temperature
- From: D from BC
- Re: Contact Thermometer for Component Temperature
- References:
- Contact Thermometer for Component Temperature
- From: D from BC
- Contact Thermometer for Component Temperature
- Prev by Date: Re: 500W / 800W INVERTER
- Next by Date: Help my neighbour's kid with his school project...
- Previous by thread: Re: Contact Thermometer for Component Temperature
- Next by thread: Re: Contact Thermometer for Component Temperature
- Index(es):
Relevant Pages
|