120 volt LED design

Is it possible that I can add an LED in series with a 120 Volt AC
circuit, this will light up to indicate that I have power when a load
is connected. This LED will have to handle 15 amp load
.

Relevant Pages

  • Re: sunnys ac-dc and some picts of yesterday ride
    ... Here's a link to a 12 volt rectifier circuit. ... Arctic Cat 440 for trail work and needed to power a 12 volt DC strobe light ... If powering a GPS, be aware that voltage requirements vary greatly. ...
    (rec.sport.snowmobiles)
  • Re: ultrasonic speaker simple amplifier
    ... In article, szekeres@xxxxxxxx (GregS) wrote: ... Help on the output circuit to switch a power transistor with the speaker ... I have used 18 volts for this type circuit, ...
    (sci.electronics.design)
  • Re: 120 volt LED design
    ... circuit, this will light up to indicate that I have power when a load ... This LED will have to handle 15 amp load ... Embedded software/hardware/analog Info for designers: http://www.speff.com ...
    (sci.electronics.design)
  • 555: strategies for series step-up transformers
    ... My projects involve rectified 1500-2000 volt power supplies with only ... I am interested in tying together identical transformers from the same ... mainly has effect of making circuit more stable over time. ...
    (sci.electronics.basics)
  • Re: 120 volt LED design
    ... circuit, this will light up to indicate that I have power when a load ... This LED will have to handle 15 amp load ...
    (sci.electronics.design)