Re: DAC software
- From: donald <Donald@xxxxxxxxxxxxxxxx>
- Date: Tue, 01 Apr 2008 20:08:02 -0700
DL wrote:
Hi,
I would like to incorporate a DAC in a board design so as to provide
some biases in the rest of the circuit and was wondering if anyone
knows if any company provides software that could program their DAC
through the serial or parallel port. Unfortunately, there is not much
time for designing and testing so I don't have time to write the
program myself. There are no tight specifications on the DAC
(preferably running at 3.3V and accuracies of 10bits and up are fine)
so basically any DAC will do as long as it has ready software to
program it.
Thanks in advance for any suggestions.
This does not make any sense.
What processor are you using ?
What is it programmed in, C, Assembly, Forth, BASIC, FORTRAN.... What ??
You don't have time to do it right, but you must have enough money to do it over.
good luck
donald
.
- Follow-Ups:
- Re: DAC software
- From: miso
- Re: DAC software
- References:
- DAC software
- From: DL
- DAC software
- Prev by Date: Re: Interesting article shows how to use opposite phase heat for cooling
- Next by Date: Re: HeathKit IG-1272
- Previous by thread: Re: DAC software
- Next by thread: Re: DAC software
- Index(es):
Relevant Pages
|
