Re: Thanks to all - well most...
- From: "Paul E. Schoen" <pstech@xxxxxxxxx>
- Date: Sat, 5 Apr 2008 01:27:38 -0400
"James Arthur" <dagmargoodboat@xxxxxxxxx> wrote in message
news:ae891525-8234-4422-88f4-80908a2c19b4@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
On Apr 4, 2:26 pm, "Paul E. Schoen" <pst...@xxxxxxxxx> wrote:
I made a self-referential circuit using a 2N3904 and 2N3906. It works in
the SwitcherCad simulator down to 2.1 volts. It may not be very stable
with
temperature, but it's cheap and easy.
Paul
[snip SWCIII ckt]
For improved temp. stability just compensate Q2's Vbe:
Vcc
-+-
|
+------------.
| |
[D2] [1.5k]
| |
[68k] +---.
| |<' |
+---------| [4.7M]
| Q2 |\ |
| +----'
| |
\| Q1 |
|---------+
.<| |
| [LED]
[150k] |
| ===
===
(D2 added, resistor values adjusted.)
Try it and compare![*]
[*] In SWCIII, .STEP TEMP 0 50 10
Cheers,
James Arthur
That is much better, about 0.48%/Degree C. I didn't know about the .STEP
directive. This info may come in handy. I think the OP has left the
building, but I have gained useful information.
Thanks!
Paul
.
- Follow-Ups:
- Re: simple 150uA constant current supply
- From: James Arthur
- Re: simple 150uA constant current supply
- References:
- Re: Thanks to all - well most...
- From: legg
- Re: Thanks to all - well most...
- From: Paul E. Schoen
- Re: Thanks to all - well most...
- From: Fred Bloggs
- Re: Thanks to all - well most...
- From: Paul E. Schoen
- Re: Thanks to all - well most...
- From: Fred Bloggs
- Re: Thanks to all - well most...
- From: Fred Bloggs
- Re: Thanks to all - well most...
- From: Paul E. Schoen
- Re: Thanks to all - well most...
- From: James Arthur
- Re: Thanks to all - well most...
- Prev by Date: Re: Where to begin
- Next by Date: Re: Very small step-up transformers?
- Previous by thread: Re: Thanks to all - well most...
- Next by thread: Re: simple 150uA constant current supply
- Index(es):
Relevant Pages
|