Re: CMOS for driving MOSFETS?

On Sun, 13 Apr 2008 05:22:39 +0000, Jon Slaughter wrote:
"D from BC" <myrealaddress@xxxxxxxxx> wrote in message
On Sun, 13 Apr 2008 04:56:30 GMT, "Jon Slaughter"
<Jon_Slaughter@xxxxxxxxxxx> wrote:

Why not use smaller mosfets to drive larger mosfet gates? One could put
them
in the same package so that logic level signals could be used to drive
large
mosfets? I'm thinking of implementing that idea discretely but maybe there
is a reason for it? (although its going to cost me about 2x the # of
transistors but its a clean switch)

I imagine that one probably could cascage cmos stages indefinitely to get
very low gate drive requirements?

http://server6.theimagehosting.com/image.php?img=CMOS-CAS.GIF

The above is just an example, I use the same mosfets in each stage but the
point is that each stage is easier to drive. (one might only need 1 or 2
stages for most fets).

Is there any problem with this? (Besides the number of mosfets, but I
imagine its no problem to do in silicon)

I suspect mosfet driver IC designers have thought of everything..
Example of one effort:
The IXDD414 mosfet driver functional diagram
http://ixdev.ixys.com/Data***/99061.pdf
shows a N and P FETs in the driver output stage.
Behind that, they're driven by gates (cmos again?)

A chain of cmos drivers might have an annoying propagation delay in
some apps.

Hehe, well, thats one that uses one stage. I'm not sure what the
propagation delay would be like but I'd imagine one wouldn't need more than
3 stages so it probably wouldn't be that big of an issue?

I think the point is more like, with the gate capacitance of the big
mosfets, you need to be able to provide a pulse that will load the
gate up with electrons, or suck them out as fast as possible, i.e.,
you have to provide a current spike - the more current your driver
has available to charge/discharge that gate capacitance, the faster
your big mosfet will switch.

Thanks,
Rich

.

Quantcast