Re: Attenuator symbol
- From: Rich Grise <rich@xxxxxxxxxxx>
- Date: Wed, 16 Apr 2008 18:52:32 GMT
On Wed, 16 Apr 2008 11:34:31 -0700, a7yvm109gf5d1 wrote:
What's the schematic symbol for a digitally controlled electronic
attenuator? As opposed to mechanically controlled vane attenuators, or
switched resistors, etc.. or a VVA.
A box with input and control logic on one side, and output on the other.
Or, you could put the control logic on the top or bottom.
Hope This Helps!
Rich
.
- Follow-Ups:
- Re: Attenuator symbol
- From: Bob
- Re: Attenuator symbol
- Prev by Date: Re: Soldering SMT Components
- Next by Date: OT Just trying to raise the kid right
- Previous by thread: floppy drive emulator hardware usb or sdcard
- Next by thread: Re: Attenuator symbol
- Index(es):
Loading
