LM2596S-12 data

General Description
The LM2596 series of regulators are monolithic integrated circuits
that provide all the active functions for a step-down (buck) switching
regulator, capable of driving a 3A load with excellent line and load
regulation. These devices are available in fixed output voltages of
3.3V, 5V, 12V, and an adjustable
output version. Requiring a minimum number of external components,
these regulators are simple to use and include internal frequency
compensation†, and a fixed-frequency oscillator.The LM2596 series
operates at a switching frequency of 150 kHz thus allowing smaller
sized filter components than what would be needed with lower frequency
switching regulators. Available in a standard 5-lead TO-220 package
with several different lead bend options, and a 5-lead TO-263 surface
mount package. A standard series of inductors are available from
several different manufacturers optimized for use with the LM2596
series. This feature greatly simplifies the design of switch-mode
power supplies. Other features include a guaranteed ±4% tolerance on
output voltage under specified input voltage and output load
conditions, and ±15% on the oscillator frequency. External shutdown is
included, featuring typically 80 μA standby current. Self protection
features include a two stage frequency reducing current limit for the
output switch and an over temperature shutdown for complete protection
under fault conditions.

Features
n 3.3V, 5V, 12V, and adjustable output versions
n Adjustable version output voltage range, 1.2V to 37V
±4% max over line and load conditions
n Available in TO-220 and TO-263 packages
n Guaranteed 3A output load current
n Input voltage range up to 40V
n Requires only 4 external components
n Excellent line and load regulation specifications
n 150 kHz fixed frequency internal oscillator
n TTL shutdown capability
n Low power standby mode, IQ typically 80 μA
n High efficiency
n Uses readily available standard inductors
n Thermal shutdown and current limit protection
Applications
n Simple high-efficiency step-down (buck) regulator
n On-card switching regulators
n Positive to negative converter
Note: †Patent Number 5,382,918.

http://www.chinaicmart.com/suppliers/509/LM2596S-12.html

.

Relevant Pages

  • Re: MGT Power supply
    ... Switching power supplies introduce ripple voltage on the voltage rails they are regulating, requiring multiple LC stages for filtering which further slows down the regulator's response time. ... Linear regulators reject this ripple but they have finite tracking bandwidth which limits their usefulness beyond 100kHz. ... precision voltage regulation is nearly impossible to achieve with switching regulators but it is nearly trivial and fairly inexpensive with linears. ...
    (comp.arch.fpga)
  • Re: TIP50 for HT regulator
    ... gate zener protection and relatively inexpensive. ... cap multiplier is not a reservoir) and screen regulators. ... I still like to add external protection around all SS regulators, ... and the load, or cap to where the load is connected. ...
    (rec.audio.tubes)
  • Re: High voltage switch =?ISO-8859-1?Q?=3C500=B5s_and_max_?= =?ISO-8859-1?Q?7kV?=
    ... the output voltage simply tracks ... Load is also a factor. ... the coax-cable capacitance, plus the switching- ... of-a-mA switching current should do just fine. ...
    (sci.electronics.design)
  • Re: Car Batteries
    ... regulators are GENERALLY shunt regulators. ... a low value, high power resistor, and the zener goes across the load ... in such a manner as to short excess voltage to ground, ... Diodes in SERIES are generally used for minor voltage adjustment (not ...
    (rec.crafts.metalworking)
  • Re: Voltage Regulators
    ... one of the regulators for some reason but the real issue is that the regulators don't seem to be regulating. ... then with no load I get the right voltage but with a 2.2k ohm + LED load the voltage drops from 8 to 4. ...
    (sci.electronics.basics)