Re: Bad Circuits in the Wild

On Sun, 11 May 2008 22:18:42 -0500, "Tim Williams"
<tmoranwms@xxxxxxxxxxx> wrote:


I (knowingly!) have a *lot* of circuits on my website that I know [now]
won't work; a few aren't even complete, leaving a complete mystery to the
curious reader. Sometimes I strive for accuracy, other times I modify a
circuit on the fly, not realizing it won't work (one particular ref:
comparator + edge detector + R/S FF = type 2 phase detector, I wired the
comparator RCs wrong!).

Of course being the factual type that I am, I early on (i.e. when creating
the page) added a disclaimer along the lines of "these circuits probably
suck"... ;-p

So it's you. You're the one...........

Get out the shotgun, Mable. :)

RL
.

Relevant Pages

  • Electronics - 3 AY plus 1 beeper IN to stereo OUT
    ... I would like to take this circuit: ... and modify it for four inputs, ... to the beeper input, to balance it with the AY input, in order to ... provide an "ACB" stereo (with Beeper across both stereo channels) ...
    (comp.sys.sinclair)
  • Re: improve telephone microphone circuit for amplifying fiddle
    ... I specifically need to modify the circuit ... described in that thread to change the response. ... Before adding the second pot and resistor, ...
    (sci.electronics.design)
  • Re: TSPP reset problem
    ... You may have AC power issues with something else taxing the circuit the pin ... I haven't got resets anymore. ... It's a mystery because I didn't do anything ...
    (rec.games.pinball)
  • Re: single pules in, multiple pulse output circuit
    ... What you need is to use a CD40103B or to modify the circuit so it'll run ... that one is 55p and can buy singles, but they have a minimum order of £25, ...
    (sci.electronics.basics)
  • Certain outlets have gone dead (Breakers all in tact)
    ... circuit breaker's just doing their job has turned into a mystery to me. ... All circuit breakers are on. ... The outlets that are affected are NOT even ...
    (alt.home.repair)