Re: high voltage amplifier with wide frequency range




<Adlerauge2001@xxxxxx> schrieb im Newsbeitrag
news:90fb8cbb-847f-4f5f-afac-09fbf758af0b@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi,

I have to design a high voltage amplifier, that should amplifiy a 3Vpp
sinussodial signal up to 300Vpp. Furthermore the amplifier should work
with linear phase over the whole frequency range from 100kHz to 4 MHz.
The load of the amplifier will be a capacitance from 2pF and a
resistor with changing values higher than 100MOhm. The current, the
amplifier should provide, is only up to 500mA. I need this amplifier
for a measurement application.

I tried in the last days a cascode amplifier which was able to amplify
the sinussodial up to 300Vpp. The great Problem is, that the sinus
will be deformed. Additionally the phase isn't linear over the
interesting frequency range. I also tried a complentary booster, but
this couldn't provide the high voltage.

Is there anybody, who can help me?

Thanks for your help,
Steff

Hello Steff,

Apex Microtech makes high voltage amplifiers.
http://apex.cirrus.com/en/products/apex/index.html
Distributor in Germany is Hy-Line.
http://www.hy-line.de/
I think even the fastest of their amps is too slow for your application.
Required slewrate:
150V*2*pi*4e6 = 3800V/us

Last but not least, if you have a cable at the amp-output,
it will have at least 0.5pF/cm. The 2pF load you have in mind
is nothing compared to the capacitance of a possible cable.

Best regards,
Helmut from Germany










.



Relevant Pages

  • Re: Help with HV common emitter and push pull stage amplifier
    ... I'm designing a high voltage amplifier and running into problems that ... a diode and current limiting resistor drop), ... However I have thermal instability with that gain and a problem with attenuation at the other frequencies. ... a couple of high voltage mosfets if needed. ...
    (sci.electronics.design)
  • Re: Help with HV common emitter and push pull stage amplifier
    ... >I'm designing a high voltage amplifier and running into problems that ... >help with gain) ... >a couple of high voltage mosfets if needed. ... >my design working, but I was hoping that I could get an idea of why my ...
    (sci.electronics.design)
  • Re: Help with HV common emitter and push pull stage amplifier
    ... I'm designing a high voltage amplifier and running into problems that ... However I have thermal instability with that gain and a problem with attenuation at the other frequencies. ... a couple of high voltage mosfets if needed. ... my design working, but I was hoping that I could get an idea of why my ...
    (sci.electronics.design)
  • Help with HV common emitter and push pull stage amplifier
    ... I'm designing a high voltage amplifier and running into problems that ... help with gain) ... a couple of high voltage mosfets if needed. ... my design working, but I was hoping that I could get an idea of why my ...
    (sci.electronics.design)
  • Re: Photodiode wich is fast enough to detect +50Mhz analog (sinus) signal??
    ... > circuit feedback (and a high-performance composite amplifier) insures ... > becoming uselessly drained away by the input-node capacitance. ... > feedback actually improves the SNR. ... whatever feedback topology u consider the noise has ...
    (sci.electronics.design)