Analog Isolator

From: hrh1818 <hrhan@xxxxxxx>
Date: Fri, 30 May 2008 13:51:42 -0700 (PDT)

Any suggestions for an analog isolator? Requirements are 0 to 5 VDC
in, 0 to 5 VDC out, 1% of full scale accuracy, monotonic output,
output ripple less 0.25% of full scale, 0 to 10 Hz frequency response,
input impedance greater than 10,000 ohms, load on output is 1 megohm,
quantity one.

Howard.
.

Follow-Ups:
- Re: Analog Isolator
  - From: Jamie
- Re: Analog Isolator
  - From: Joerg

Prev by Date: Re: Immunity testing at EMC: How many hours are normal?
Next by Date: Re: Immunity testing at EMC: How many hours are normal?
Previous by thread: Immunity testing at EMC: How many hours are normal?
Next by thread: Re: Analog Isolator
Index(es):
- Date
- Thread

Relevant Pages

Re: Analog Isolator
... VDC in, 0 to 5 VDC out, 1% of full scale accuracy, monotonic ... output, output ripple less 0.25% of full scale, 0 to 10 Hz ... around the web for analogue isolators using ordinary opto-isolators. ...
(sci.electronics.design)
Re: Analog Isolator
... in, 0 to 5 VDC out, 1% of full scale accuracy, monotonic output, ... output ripple less 0.25% of full scale, 0 to 10 Hz frequency response, ...
(sci.electronics.design)
Re: Analog Isolator
... in, 0 to 5 VDC out, 1% of full scale accuracy, monotonic output, ... output ripple less 0.25% of full scale, 0 to 10 Hz frequency response, ...
(sci.electronics.design)
Re: Analog Isolator
... in, 0 to 5 VDC out, 1% of full scale accuracy, monotonic output, ... output ripple less 0.25% of full scale, 0 to 10 Hz frequency response, ...
(sci.electronics.design)
Re: Analog Isolator
... in, 0 to 5 VDC out, 1% of full scale accuracy, monotonic output, ... output ripple less 0.25% of full scale, 0 to 10 Hz frequency response, ...
(sci.electronics.design)