Re: Floor Temperature


"Paul Hovnanian P.E."

I think your money would be best spent figuring out how to encapsulate a
contact-type sensor to protect it from ambient gunk.


** Why not just some 5 minute epoxy ??



..... Phil


.

Relevant Pages

  • Re: Floor Temperature
    ... contact-type sensor to protect it from ambient gunk. ... ** Why not just some 5 minute epoxy ?? ... That'll do the trick. ...
    (sci.electronics.design)
  • Re: teak floor coating
    ... If you truly want to protect exterior wood, ... Strip to bare wood, then apply 4-5 coats of laminating epoxy, sanding ...
    (rec.boats.cruising)
  • Re: Black epoxy covering ICs?
    ... > I've often noticed on some circuit boards that there is a type of black ... > epoxy that seems to be covering ICs. ... > hide the IC being used to protect the design or is it a type of cheap ... it consisted of just a chip with the legs connected to the parallel ...
    (sci.electronics.basics)
  • Re: Black epoxy covering ICs?
    ... > Michael Bohlender wrote: ... >> most of the time this epoxy is used to replace the IC case! ... the epoxy is to protect the chip as well as the bonding wires ...
    (sci.electronics.basics)