Re: EMC lab, screen room that fits a regular truck?

mpm wrote:
On Jun 23, 2:27�pm, Joerg <notthisjoerg...@xxxxxxxxxxxxxxxxxxxxx>
wrote:
Hello Folks,

So far I've got no responses from the usual places and chances are they
can't accommodate us this time. We want to do conducted susceptibility
measurements on electronics for a truck. Since the cables will likely
radiate off the stuff that's injected into them this would have to be
done in a somewhat shielded environment. Doesn't need the foam
dispersers and stuff but at least a good tight shield.

The problem: This is a full size tractor-trailer kind of truck. Full
length with sleeper cab. Dismantling the exhaust stacks won't help much
since the cab is almost that high itself. IOW it's "da big machine".
Sans trailer though.

Any ideas? Ideally a lab that has the big amps and stuff so we don't
have to rent. But either way is fine. Locations around Fremont, CA or at
least Bay Area surroundings would be great. These things often yield
only 5mpg or less on Diesel ...

--
Regards, Joerg

http://www.analogconsultants.com/

"gmail" domain blocked because of excessive spam.
Use another domain or send PM.

Can you do this outdoors, perhaps at an FCC Quiet Zone (or equiv.) and
correct from there?
Not sure if there are any out your way though.

I do hear Boeing has a screen room big enough for a jumbo jet.

Or course, that's probably up near Seattle, so at $4.75 a gallon for
diesel....


It's >5 by now :-(

We've got some mil places around here but they won't let civilians in. Nevada would be an option but we'd be in 110F and in the scorching sun all day. Plus with some luck you return to the generator to change a setting and a rattler has curled up on it.

--
Regards, Joerg

http://www.analogconsultants.com/

"gmail" domain blocked because of excessive spam.
Use another domain or send PM.
.

Relevant Pages

  • Re: EMC lab, screen room that fits a regular truck?
    ... done in a somewhat shielded environment. ... length with sleeper cab. ... "gmail" domain blocked because of excessive spam. ...
    (sci.electronics.design)
  • Re: EMC lab, screen room that fits a regular truck?
    ... length with sleeper cab. ... "gmail" domain blocked because of excessive spam. ... They tested a "famous" electric car in their indoors 10 m chamber. ...
    (sci.electronics.design)
  • Re: EMC lab, screen room that fits a regular truck?
    ... this would have to be done in a somewhat shielded environment. ... length with sleeper cab. ... Find a nice quiet metal warehouse somewhere way out of town! ... I did loads of EMC tests in a wooden scout hut. ...
    (sci.electronics.design)
  • Re: Any beefy coil driver chips?
    ... "gmail" domain blocked because of excessive spam. ... Fuel injector driver like a LM1949, ... Hey, don't skedaddle over to another topic here, the body connection ...
    (sci.electronics.design)
  • Re: EMC lab, screen room that fits a regular truck?
    ... We want to do conducted susceptibility measurements on electronics for a truck. ... Since the cables will likely radiate off the stuff that's injected into them this would have to be done in a somewhat shielded environment. ... Full length with sleeper cab. ... The US car makers have the EMC labs for testing vehicles in house. ...
    (sci.electronics.design)