Re: Something for Joerg, maybe

On Sun, 12 Oct 2008 17:32:44 -0700, Jim Thompson
<To-Email-Use-The-Envelope-Icon@xxxxxxxxxxxxxxx> wrote:


On Sun, 12 Oct 2008 17:15:59 -0700, Joerg
<notthisjoergsch@xxxxxxxxxxxxxxxxxxxxx> wrote:

Jim Thompson wrote:
On Sun, 12 Oct 2008 16:21:48 -0700, John Larkin
<jjSNIPlarkin@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

On Sun, 12 Oct 2008 15:10:17 -0700, Jim Thompson
<To-Email-Use-The-Envelope-Icon@xxxxxxxxxxxxxxx> wrote:

On Sun, 12 Oct 2008 14:18:35 -0700, John Larkin
<jjSNIPlarkin@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

On Sun, 12 Oct 2008 13:55:25 -0700, Jim Thompson
<To-Email-Use-The-Envelope-Icon@xxxxxxxxxxxxxxx> wrote:

On Sun, 12 Oct 2008 16:33:29 -0400, Phil Hobbs
<pcdhSpamMeSenseless@xxxxxxxxxxxxxxxxxx> wrote:

Martin Griffith wrote:
http://www.linear.com/pc/productDetail.jsp?navId=H0,C1,C1003,C1040,C1055,P86471

martin
Wow, that 'typical application' internal schematic is a new low for LTC.
What is it, germanium?

Cheers,

Phil Hobbs
Naaaaaah! Those of us skilled in the art of electronics (the real
stuff, not the book) see a unity gain CMOS buffer with reference
generated by a BandGap controlled current ;-)

...Jim Thompson

You don't believe the NPN output transistor symbol?

John

Can't make the claimed head-room that way ;-)

...Jim Thompson

It can if you pull the base high enough. Which they do.

John

My bad! Didn't read close enough. You _could_ use a charge pump to
accomplish such a task.


Ask CA politicians, they'll tell you how to do it without. Well, at
least up to now :-(

Charge pumps are so easy to do... I've even utilized them in hearing
aids (for the MEMS microphone) and hot-plug circuits.. Could give you
LDO without the stability issues, though I'm not sure how well they
could respond to transient loads.

...Jim Thompson


We recently "invented" the flying-capacitor "isolated" DC power
supply, using 300 volt SSRs in a DPDT configuration. They switch slow
enough that the spike situation should be pretty good, compared to
most dc/dc converters. And no transformers!

It's about time for somebody to make a small laser/pv package as a
very quiet isolated power supply.

John

.

Relevant Pages

  • Re: Something for Joerg, maybe
    ... ...Jim Thompson ... You don't believe the NPN output transistor symbol? ... You _could_ use a charge pump to ...
    (sci.electronics.design)
  • Re: OT: telephone black box
    ... Jim Thompson wrote: ... Be advised that the majority of SPAMcalls "id" as "UUU UNKNOWN CALLER" or as "PPP PRIVATE CALLER" and the so-called trace does not work. ... A selection of pre-programmed responses that the user can "piece together" would seem to be ideal, and definitely should include those 3 magic tones. ...
    (sci.electronics.design)
  • Re: Need Circuit Design -- Cheap...
    ... suggested voltage capability higher than 5V. ... Donate in the name of Duane Lee Thompson, my youngest son, who died at ... GND GND ... ...Jim Thompson ...
    (sci.electronics.design)
  • Re: No More Dependence on Foreign Oil- Coming to Your Neighborhood Soon
    ... Jim Thompson wrote: ... Let me remind everyone here that the "leftist weenies" claimed global ... huge amount of liquid methane embedded deep in the oceans which will be ...
    (sci.electronics.design)
  • Re: Vbe stuff
    ... Jim Thompson wrote: ... This will cause a departure from the simplified minority carrier density ... ACROSS THE TRANSITION REGION AND THE ACCOMPANYING MINORITY CARRIER ...
    (sci.electronics.design)
Quantcast