Re: Modem genius wanted

On 2009-02-09, mkrnews@xxxxxxxxx <mkrnews@xxxxxxxxx> wrote:
I'm at the end of the road on this and perhaps there is someone out
there who may have a clue why I'm having this problem.

I have a couple of modems that I've tried, with the same result.

I'm talking to the modem using AT commands and the serial port.

I'm using BOTH hyperterminal and visual basic in my attempts.

Here's the problem ---

I can get an OK response on any valid command I send to the modem and
it doesn't matter what mode the modem is in.....(data, voice or
command).

BUT

I CANNOT get any response to my dialout command (ATDT13174446354 & cr)
(for example).

The modem will get dial tone, call out and I can answer with no
problems whatsoever, but I don't get any AT response......(like RING,
BUSY, NO ANSWER etc).

I am not talking to another modem.....I'm calling a telephone number.

(But it's my understanding, that doesn't matter).

These are "connection progress" messages I should be getting from the
originating modem to it's PC and after all. like I say, I get an OK on
any other good command.

Thanks so much for any help on this.

sounds like you are not waiting long enough

.

Relevant Pages

  • RE: Sierra Wireless (MC8780) HSDPA speed issue
    ... I have solved the modem hangup issues when using the AT control device ... The problem appears to be the AT&C1 command. ... Three devices appear, ttyUSB0, ttyUSB1, ttyUSB2. ... I have successfully reached average download speeds above 400KB/s. ...
    (Linux-Kernel)
  • trace ip
    ... Ascend digital modem box, his last attack I logged he tried 15 or so ... easy to see from the out side or make the security really LAX on that comp. ... It is all command ...
    (microsoft.public.security)
  • Re: trace ip
    ... > How can I trace someone trying to hack my ascend digital vpn modem? ... > authentication and is being logged into our RAD logs. ... > to c:\) So it will look like this in command ... Anyway I am not too worried about security ...
    (microsoft.public.security)
  • Re: Modem genius wanted
    ... You really need an AT command set, and to read the thing end to end! ... From my old modem manual ... ... ATV1 Result codes as words <- You probably want this ... Dialling is blind, regardless of dial tone. ...
    (sci.electronics.design)
  • trace ip
    ... >Ascend digital modem box, his last attack I logged he ... >authentication and is being logged into our RAD logs. ... It is all command ...
    (microsoft.public.security)