Re: EN60065 - safety and audio in/out terminals


<wimabctel@xxxxxxxxx>


You will probably have a transformer inside the cabinet. Imagine your
transformer has 100pF between Primary live and secondary (that is -
j32MOhm). This means that at 1500Vac, the current will be max 47uA.


** No so if there are any Y caps from the AC supply input to chassis
ground.

Values up to 4700 pF are allowed.




..... Phil




.

Relevant Pages

  • Re: Can I use a 120V Variac to get 220V?
    ... While one might imagine situations where this technique is ... If your caps don't need reforming, ... current through transformer and bleeeder resistors, ... what voltage do you set the variac too? ...
    (rec.radio.amateur.homebrew)
  • Re: surge protection built into ordinary household electronics
    ... It would be a good exercise for you to look at just the transformer. ... Imagine 60V on the secondary. ... can't do that, surely lightning can ... ...
    (sci.electronics.design)
  • Re: PUSH PULL AMPLIFIER (MOSFET) HELP NEEDED
    ... >Pushpull amplifiers can be with transformer or without them. ... I imagine you are ... >going for a transformerless one, which will be a cheaper solution too, ...
    (sci.electronics.equipment)
  • Re: PUSH PULL AMPLIFIER (MOSFET) HELP NEEDED
    ... >Pushpull amplifiers can be with transformer or without them. ... I imagine you are ... >going for a transformerless one, which will be a cheaper solution too, ...
    (sci.electronics.design)
  • Re: PUSH PULL AMPLIFIER (MOSFET) HELP NEEDED
    ... >Pushpull amplifiers can be with transformer or without them. ... I imagine you are ... >going for a transformerless one, which will be a cheaper solution too, ...
    (sci.electronics.basics)