EOL Resistor

From: "Telkom" <digilog@xxxxxxxxxxxx>
Date: Mon, 16 Mar 2009 15:39:21 +0200

plse send me a circuit of a op amp used in a end of line resistor in a alarm
system

Thks
Rob

.

Follow-Ups:
- Re: EOL Resistor
  - From: Eeyore

Prev by Date: Re: What is the best topology for an offline SMPS 330W?
Next by Date: Re: How much distortion is acceptable on residential utility power?
Previous by thread: Virgin Mobiles – Buy Virgin Mobiles at Lowest Price
Next by thread: Re: EOL Resistor
Index(es):
- Date
- Thread

Relevant Pages

Re: Some Notes on Gary =?iso-8859-1?Q?Pimm=92s?= Phono Preamp
... Follower as the input amp. ... The 47 K input resistor forms part of the playback correction curve in ... this case an actual circuit needs to be posted as proof. ... So then what is your explanation for the rectifiers used in this phono preamp? ...
(rec.audio.tubes)
Re: Hardening a simple op-amp circuit against EMI
... Is the 1 uF load still a problem in the corrected circuit drawing ... The input impedance of an op amp can be seem as a high value resistor ... I've had trouble finding specs on the input capacitance of an op-amp ...
(sci.electronics.design)
Re: Alan Dower Blumliens garters - the great balanced rest bias circuit!
... a shared cathode resistor circuit. ... But, the basic idea, of a balanced P-P circuit that does absolutely ... As per my usual strict Scientificult Principia, if neither amp sounds ...
(rec.audio.tubes)
MMf-EMf(VMf) two ways to cause a current.
... You cannot have a current without something to push the electrons off ... resistor across the line and neutral. ... the supply cannot deliver a 20 amp current as it was specified. ... The resistor is a device that limits current for a circuit and that is ...
(sci.electronics.basics)
Re: Fender Twin Reverb Wiring Help!!!
... This is for all of the wiring and amp workers. ... 'Blackfaced' - ie, rewired the bias circuit, removed a cap or two - ie, ... you should put a 100 ohm resistor to ground on either side ...
(alt.guitar.amps)