Re: ac voltage divder

On Thu, 30 Apr 2009 08:56:32 +0800, the renowned rebel
<me@xxxxxxxxxxx> wrote:

On Wed, 29 Apr 2009 06:39:13 -0700 (PDT), jabriol <jabriol2000@xxxxxxxxx> wrote:

All,

I need to design a voltage divider, that is going to drop 15vac.
like 120 to 105 at .385 amps. voltage is running 400Hz

Any ideas?

A 120 to 15 transformer?

Variac?

http://www.elect-spec.com/variac_400.htm



Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
speff@xxxxxxxxxxxx Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
.

Relevant Pages

  • Re: Controlled impedance (stripline etc.) boards
    ... Design. ... Spehro Pefhany wrote: ... > and microstrip designs that have analog signal traces relatively ... > The spacing I get for the desired max level of crosstalk without this ...
    (sci.electronics.cad)
  • Re: ac voltage divder
    ... I need to design a voltage divider, that is going to drop 15vac. ... Spehro Pefhany ... Same as a transformer, but gives no isolaton. ... isolation would a 120:15 tranformer give in when properly connected in ...
    (sci.electronics.design)
  • Re: The Electric Car
    ... On Aug 1, 6:27 am, Spehro Pefhany ... of fuel per cycle and says that it wouldn't. ... in a practical production car. ... do that is an example of bad design. ...
    (sci.electronics.design)
  • Re: Analog use of CMOS logic chips
    ... Spehro Pefhany wrote: ... No, no, you can get in trouble for archiving the dirty pictures. ... Wescott Design Services ...
    (sci.electronics.design)
  • Re: Need simplest circuit to convert momentary switches to latching "switches"
    ... Spehro Pefhany ... here's an old P&B design available in surplus: ... Digikey has some similar ones in stock for $47.64 ...
    (sci.electronics.design)
Quantcast