Digibox problem - UK

From: Vince (vince_at_freeuk.com)
Date: 01/06/05


Date: Thu, 06 Jan 2005 15:53:36 GMT

Hi,

I have just connected up a JVC 28" flat screen TV to a Grundig digibox
(decoder). In parallel with the digibox I can still tune into conventional
terrestrial TV channels as before. The problem is that with the digibox
channels there is often a flickering of the picture - rapidly jumping up and
down by a small amount. This can occur on a single channel depending on
which camera shot is being shown. The flickering will turn on and off
depending on the shot. The fault never occurs when I am tuned into a
conventional channel (signal directly from antenna via co-ax cable), without
using the digibox. I have tried all possible input sockets for the Scart,
and also changed the picture display (mode) settings, but to no avail.

Any ideas what the cause might be, please?



Relevant Pages

  • Re: Question ( possibly silly) non tech person.
    ... > Firstly, your aerial wire should go into the Digibox and then a second, ... "aerial" wire should go from the Digibox to the TV. ... I have to unplug mine from the digibox and put the arial straight back into ... > "replace all channels". ...
    (uk.tech.digital-tv)
  • Re: Question ( possibly silly) non tech person.
    ... > I have to unplug mine from the digibox and put the arial straight ... > digibox and unplug the scart and reconnect the aeriel. ... The SCART connection is to enable you to watch the digital channels. ...
    (uk.tech.digital-tv)
  • Re: Freeview Boxes Again
    ... the digibox to flicker. ... then let you choose whatever channels were showing something relevant. ... the menus did at least have band titles so you could ... It might be worth mentioning that the Beeb's digital teletext videos ...
    (uk.media.radio.archers)
  • Re: Freeview Boxes Again
    ... the digibox to flicker. ... then let you choose whatever channels were showing something relevant. ... finished showing The Killers and then started showing, ...
    (uk.media.radio.archers)
  • Re: No ITV2
    ... >>I receive all other channels and signal is almost 90% throughout. ... > the receiver, or a faulty LNB. ... > Put the digibox into standby. ... > problem with your dish alignment, ...
    (uk.tech.tv.sky)