Re: Need pinout schematic for my external drive ribbon cable

MikeyMuchos@xxxxxxxxx wrote: 
Hi,
my friend is trying to mend my external drive/enclosure. I said I'd try
to find a schematic for the pinout on the ribbon cable. The cable seems
to be different than the standard one. There seems to be a lot more and
finer wires, though the connector is standard. Please can anyone offer
any advice?

Regards,
Mike

Is this a joke?

How the heck can anybody here help you with so little information?

E.g. is it SCSI, USB, Firewire, Ethernet, something else?

--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam.  Our true address is of the form che...@xxxxxxxxxxxx
.

Relevant Pages

  • Need pinout schematic for my external drive ribbon cable
    ... my friend is trying to mend my external drive/enclosure. ... to find a schematic for the pinout on the ribbon cable. ... though the connector is standard. ...
    (sci.electronics.equipment)
  • Re: VGA 15 pin/9 pin Multisync=standard?
    ... I assume this is the pinout which works for all common PC monitors ... But several years ago I had an Nec Multisync II monitor which I used ... The notes on that page say that it is "somewhat standard" -can someone ...
    (sci.electronics.basics)
  • Re: Z88 file transfer problems.
    ... > I have a standard null modem cable which works ok with my Amstrad NC 100, ... > but for the life of me I cannot transfer files to my PC (using ... The original PC-Link cable pinout is recommended. ... Help and left arrow to see "The Cambridge Computer Z88 Portable ...
    (comp.sys.sinclair)
  • Re: Splitting serial cables ?
    ... > bill@xxxxxxxxxxx (Bill Gunshannon) writes: ... > speaking RS232 to control them, but they used a DB-9 using a pinout ... > entirely different from the standard pinout ... and DCD which are merely off/on type signals. ...
    (comp.os.vms)