Re: Need Service Manual for Tektronix 2213 Oscope
- From: "tekamn" <and7@xxxxxxxxxxx>
- Date: 24 Jan 2006 01:21:04 -0800
Thomas Hejl wrote:
> I am repairing a 2213 scope for a friend. First it keep blowing fuses. I
> trouble shot it to the diodes in the rectifier circuit (they shorted out). I
> now get DC to the board for Hor & Vert detection. The problem now lies in
> that the CRT will not light. So I need a service manual to check voltages
> going to the pins on the CRT. (OR if anyone has the same unit, could you
> measure the voltages on pins and send it to me?) Worst fear is that the CRT
> is dead.
>
> TIA,
> Tom
Hi Tom,
look for a service manual of 2215 /2215A too. Nearly same circuitry. HV
should be identical.
maybe a check a bama.sbc.edu for a download will help.
For more manual sites, do a google check. This topic has been answered
very often, so you shoul find some help.
hth,
andreas
.
- Follow-Ups:
- Re: Need Service Manual for Tektronix 2213 Oscope
- From: Thomas Hejl
- Re: Need Service Manual for Tektronix 2213 Oscope
- References:
- Need Service Manual for Tektronix 2213 Oscope
- From: Thomas Hejl
- Need Service Manual for Tektronix 2213 Oscope
- Prev by Date: FS: Microwave/RF Components
- Next by Date: Re: Modify Panasonic Fax
- Previous by thread: Need Service Manual for Tektronix 2213 Oscope
- Next by thread: Re: Need Service Manual for Tektronix 2213 Oscope
- Index(es):
Relevant Pages
|