Re: 12v cd to tape converter -fuse type

There should be a label at the actual fuse block, it will indicate the
ratings in amps of the required fuse.
The back panel or bottom of the device should also show the wattage rating,
or maybe even amperage draw.
??What caused the fuse to blow? There had to be an overload to cause the
failure.
"tom" <tominto@xxxxxxxxx> wrote in message
news:1150494337.725831.215110@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hello. I need to replace the fuse in a 12v cd to tape converter. I
removed the old one, but I seemed to have lost it so now I don't know
what kind of fuse I'm looking for. Any help gratly appreciated. Thanks



.

Relevant Pages

  • Re: Exploding 3A fuse...WTF???
    ... cause an explosion. ... But why did that particular fuse explode, ... We tend to think of fuel exploding in cylinders of heat engines, ... The ratings are only superficially similar. ...
    (rec.crafts.metalworking)
  • Re: Re: Re: Fuses for 12v system
    ... Thank you Peter. ... When a fuse said, for example, 5 Amps ... Rupture ratings are the fault current that the fuse will pass before blowing, ...
    (uk.rec.waterways)
  • Re: Fuse for HF Dual MIG 151
    ... motor doesn't run. ... It is a 2 Amper fuse. ... the interrupting capacity ratings of any fuse. ... break the arc - and that arc will quickly start doing major damage to ...
    (sci.engr.joining.welding)
  • Re: Fuses for 12v system
    ... Don't think I've ever seen a cartridge fuse arc? ... One of the ratings for fuses and carriers is the overall maximum ... Peter A Forbes ...
    (uk.rec.waterways)
  • Re: Electrical problems at home related to RPC
    ... > Pete C. wrote: ... >>>is a supply company fuse somewhere upstream but with Iggy, ... >> is unlikely to blow if someone shorts one phase in their panel. ... You're responsible for the meter socket on. ...
    (rec.crafts.metalworking)