Re: DSO spec confusion
- From: Joerg <notthisjoergsch@xxxxxxxxxxxxxxxxxxxxx>
- Date: Mon, 17 Mar 2008 18:10:24 -0700
Rich Webb wrote:
On Tue, 18 Mar 2008 00:10:45 GMT, Joerg
<notthisjoergsch@xxxxxxxxxxxxxxxxxxxxx> wrote:
Tektronix has inferior sample memory depth and the TDS210/220 series is prone to 40/80kHz noise, probably from its backlight inverter. IMHO a disgrace to Tektronix. There was also some kind of safety recall because of a sub-par ground connection. You might want to check that.
Mine's a fairly late model TDS220 and was produced well after the
range that was affected by the power supply recall -- thanks for the
tip, though! It's also quiet with respect to the inverter noise so I
don't really have any excuses to ditch it... ;-)
Then it should be ok. Except that the ones I used had no connectivity, I had to snap digicam pictures. I did use them for lots of serial bus debugging though and they performed those jobs nicely.
--
Regards, Joerg
http://www.analogconsultants.com/
.
- References:
- DSO spec confusion
- From: Brett Pantalone
- Re: DSO spec confusion
- From: Rich Webb
- Re: DSO spec confusion
- From: Joerg
- Re: DSO spec confusion
- From: Rich Webb
- DSO spec confusion
- Prev by Date: Re: DSO spec confusion
- Next by Date: Tektronix 7633 cannot accept 7L13
- Previous by thread: Re: DSO spec confusion
- Next by thread: Re: DSO spec confusion
- Index(es):
Relevant Pages
|