Re: 48 Pin TSOP Test Clips
- From: "Tony Burch" <tony@xxxxxxxxxxxxxx>
- Date: Sat, 29 Mar 2008 17:32:13 +1100
"Brian" <bdkorn@xxxxxxxxx> wrote in message
news:49ca32e7-6287-496b-ac4e-d6235493debe@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Does anyone know either a cheap place to buy or a way to cheaply make
a 48 Pin TSOP Test Clip? I really don't want to desolder and resolder
a 48 pin package.
There is an awesome idea here
http://camerahacks.10.forumer.com/viewtopic.php?t=1259
Basically it involves cutting wire wrap wire at a sharp angle, so that you
have a contact on one side and insulation the other side, and then push it
between pins. Here's a quote from that link:
"the procedure is simple
take a short length if unstripped wire wrap, and cut it at a sharp angle ,
you now have a needle sharp wire that is insulated on one side. shove it
between some pins , making sure the insulation is facing one of the pins (it
should beable to hold itself in).
repeat procedure for all of the pins you intend to connect to
you can hotglue the wires together to make it easier to reinsert them later,
just be careful not to dislodge them in the process. "
Cheers,
Anthony
Getting Started With FPGAs Video Guide http://www.BurchED.com
.
- References:
- 48 Pin TSOP Test Clips
- From: Brian
- 48 Pin TSOP Test Clips
- Prev by Date: Looking for HP8711A network analyzer
- Next by Date: Texscan VSM-1A Spectrum Analyzer
- Previous by thread: 48 Pin TSOP Test Clips
- Next by thread: Re: REQ: Data I/O Unisite XPI - Tasklink for Windows
- Index(es):
Relevant Pages
|
|
