Re: Advice on PC Based Logic Analyzer
- From: Jean-Yves <no-pub-for-jypochez@xxxxxxx>
- Date: Tue, 15 Apr 2008 14:01:31 +0200
In article
<9591c2c7-93e1-4bbf-bd75-35bcfcfade68@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>,
logicgeek <logic.analyzer@xxxxxxxxxxx> wrote:
8 channels is too low for a logic analyzer
16 is a minimum
34 is far enought
you must count $500 for a complete logic port with some grabbers...!
I never heard of this annie-usb before...
but saw a lot of people around here happy with their logicport
so...make your choice !
--
Jean-Yves.- Hide quoted text -
- Show quoted text -
What I like about the Annie-USB is that it comes complete with SMD
grabber clips that optionally would cost some extra money.
If you have the time go to www.janatek.com/annie-usb main.htm. It
retails just below $500..My only concern thou is that it sports only 8-
channels. However they have a nice little article on their website
about evaluating logic analyzers and I must say that I agree with this
article in that I will rather buy 8 'good channels' with sufficient
buffer depth than 32 channels and anyway not be able to use them all.
The faq article is at: http://www.janatek.com/faq buying logic analyzer.html#6
I've talked to some people and most of them said that I should opt for
sufficient buffer depth. What is the feedback of those happy okes
using logicport?
the logicport has a compression algorythm so that he can record days of
datas. it only records when the data changes.
the annie usb record also when the data dont change which is a waste of
buffer...
and definitely 8 channels is not enought
the logicport with 34 grabbers (and channels) is around $500
the sufficient buffer depth is to compare with old logic analyzers that
had only some ko of memory and that are unusable today.
the logicport has enought.
--
Jean-Yves.
.
- Follow-Ups:
- Re: Advice on PC Based Logic Analyzer
- From: logicgeek
- Re: Advice on PC Based Logic Analyzer
- References:
- Advice on PC Based Logic Analyzer
- From: logicgeek
- Re: Advice on PC Based Logic Analyzer
- From: Jean-Yves
- Re: Advice on PC Based Logic Analyzer
- From: logicgeek
- Advice on PC Based Logic Analyzer
- Prev by Date: Re: Advice on PC Based Logic Analyzer
- Next by Date: Re: Advice on PC Based Logic Analyzer
- Previous by thread: Re: Advice on PC Based Logic Analyzer
- Next by thread: Re: Advice on PC Based Logic Analyzer
- Index(es):
Relevant Pages
|