Re: hp5326a timer-counter
- From: Jorgen Lund-Nielsen <jorgen.lund-nielsen@xxxxxxxxxxxxx>
- Date: Mon, 26 May 2008 13:03:57 +0200
Caesar Valenti wrote:
RoV wrote:
Hi all,
I have found an old hp5326a that I would like to repair because I like to restore old equipment.
Almost everything works apart input A. The problem seems to stay on the input board p/n 05327-60034, because even swapping the two boards connected to it to handle the triggering for A and B, the problem remains on A.
By comparing channels A and B, I see that in the working channel the trigger level pot changes a voltage on the connector going to the respective trigger board, while this doesn't happen on the other channel. The corresponding line goes to a metal can, 6 pin chip marked 5-334.
Unfortunately I couldn't find the schematic on the net (for free or at least cheaper respect to what I payed the instrument...). Neither I was able to find any info about the chip: I tried something like 1855-0344 but I later discovered that, in hp numbering, xxx5 is never used for ICs.
I wonder if someone can help...
(my real mail is on the web page)
Regards,
You had the right idea. The p/n is 1855-0334 (not 0344). It is not an IC, but rather a dual FET, hence the 6 pins. I think the manufacturer is Siliconix.
Unfortunately, I could not (easily) find a cross-reference, so I do not know much about it....but there are a couple dozen hits in Google....try that.
cv
http://www.sphere.bc.ca/test/hp-parts/hpparts4.html
scroll down to 1855-0334
but beware, 24$/pice (Canadian $)
Jorgen
dj0ud
HTH,
Jorgen
.
- Follow-Ups:
- Re: hp5326a timer-counter
- From: RoV
- Re: hp5326a timer-counter
- References:
- hp5326a timer-counter
- From: RoV
- Re: hp5326a timer-counter
- From: Caesar Valenti
- hp5326a timer-counter
- Prev by Date: Tek 1502C Service Mnual
- Next by Date: Re: hp5326a timer-counter
- Previous by thread: Re: hp5326a timer-counter
- Next by thread: Re: hp5326a timer-counter
- Index(es):
Relevant Pages
|
Loading