Re: Question about reversed-polarity in an AC outlet

From: NSM (nowrite_at_to.me)
Date: 02/23/05 

Date: Wed, 23 Feb 2005 06:03:01 GMT

"Beeper" <Beeper@echoes.net> wrote in message
news:cvfuko0cnl@enews1.newsguy.com...
> Wrong again! Many times a sub panel is introduced into the picture and you
> run an isolated neutral. by Isolated I mean it is not bonded to the ground
> strip. This is done because the Ground is not suppose to have current on
> it. It is as Terry said a safety device. If you were to bond the neutral
and
> ground bars in the sub panel, then the ground would share the current load
> back to the main panel.

Where it is grounded.

N

Quantcast