Quadravox QV356M4 sound board problems

Hi everybody,

I have this QV356M4 sound board for a robotics project, and I try to
load my own sounds into the board. I use the QV300S2 software, the
board is linked to the PC and connected to a basic stamp(from
parallax). I'm sure all the connections are fine and also the
recording mode switch on the board is in the RS232 position.
When I try to load the sounds from the software into the board, the
red
LED on the board goes ON, so the recording is happening. The problem
is
I can't play those sounds. I tried to play them with the software,
using the PLAY button, but all I get from the board is some white
noise
(which lasts about the lenght of the file). The software settings are
fine, and also I've tried to load the sample files that came with the
software.
I know that it's an old product(2003), but please, if you have any
ideas, solutions, anything, leave a message.

Thanks a lot.

.

Quantcast