Re: AC adaptor for Dell Latitude CSx latptop



On 2005-09-22, Allan Adler <ara@xxxxxxxxxxxxxxxxxxxx> wrote:

> The adaptor is starting to fail. It fails to power the laptop unless it is
> in a very specific position. I took a look at the exposesd wire with a
> magnifying glass. There seems to be a thin plastic wire inside surrounded
> by a kind of stranded wire that looks like aluminum. It is apparently the
> stranded wire that has sustained the break. Now that I realize that, I'm
> considering trying to solder it, but I've never done soldering with this
> kind of situation before: first there is the stranding, instead of solid
> wire, which isn't too bad, but also the fact that it surrounds the thinner
> plastic (in appearance) wire. Also, it is right next to the black box, so
> there is very little margin for error and not much to work with on the side
> coming from the box.
>
> If someone has advice on how to handle this, it would be welcome. I don't
> know whether it is possible to open the black box. If so, I might be able
> to scrounge some more length of wire or replace it.

if you can, open the box, that sort oof repair in the wire done close to
the box is likely fail again soon.

Some boxs have screws hidden under labels, or under plastic plugs, or
little rubber feet.

Some boxes clip together, others are glued, still others are full of resin.
the glued boxes will often open if tapped repeatedly and lightlynear the
seam with with a hammer.

> I'm not absolutely sure that the plastic looking wire in the center is
> an electrical wire. The spark when it connects sometimes looks greenish,
> like the led, so maybe it is really a fibre optic cable or something.

It's almost certainly electric.

> I don't know what I'm working with. That's part of the problem.

when you get the box open be careful. some parts near the power inlet could
hold a high voltage.

Bye.
Jasen
.



Relevant Pages

  • Re: AC adaptor for Dell Latitude CSx latptop
    ... The adaptor is starting to fail. ... There seems to be a thin plastic wire inside surrounded ... by a kind of stranded wire that looks like aluminum. ... considering trying to solder it, but I've never done soldering with this ...
    (sci.electronics.misc)
  • Re: Washing machine
    ... Jobst has a ten page explanation in the instructions why it works ... Except they fail in the first month because there is neither wire ...
    (rec.bicycles.racing)
  • Re: TalkTalk free broadband - the details
    ... Nothing, since obviously, the wire isn't attached to anything at ... interweb thang. ... I fail to see the connection with local democracy. ... Mark McIntyre ...
    (uk.telecom.broadband)
  • Re: Redundant NIC config, need help
    ... In comp.os.linux.networking Lyndon Bartels: ... > either NIC were to fail, or the path to that nic were to fail (ie. wire ... #bofh excuse 179: multicasts on broken packets ...
    (comp.os.linux.networking)
  • Re: Redundant NIC config, need help
    ... In comp.os.linux.networking Lyndon Bartels: ... > either NIC were to fail, or the path to that nic were to fail (ie. wire ... #bofh excuse 179: multicasts on broken packets ...
    (comp.os.linux.hardware)