Power supplies in parallel for more current/same voltage?
- From: "Daniel Morrow" <videoman@xxxxxxxxxxxx>
- Date: Sun, 13 Nov 2005 18:27:45 -0800
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi everyone! I am trying to find a cheap way I can increase the
current capacity of a power supply by installing fuses to each output
of multiple universal power supplies, setting each polarity
correctly, setting each voltage correctly, but in other words combine
power supplies to get up to 3 amps or more available from the
parallel power supplies, to drive digital cameras. I have researched
power supply providers and have found no usable/cheap enough power
supplies (those dedicated power supplies are very expensive -
especially if you have to buy one for every single digital camera)
and found no suitable devices, and I don't want to convert a pc power
supply because there appears to be no way to avoid the intense heat
from seemingly any appropriate load. Also - I have never found a
universal wall mount power supply that would deliver enough current
for a digital camera. So, can I successfully do what I proposed
(parallel connected power supplies)? Any dangers? Plus - I would have
every individual power supply connected to a power strip with switch
as a group. Your comments are welcome. Good luck and later!
- - --
You can find my public key at https://keyserver1.pgp.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (MingW32) - WinPT 0.7.96rc1
iQD1AwUBQ3f2A62WfcjE5myzAQLuUAb/awbOs47ErUV57++sx5Ud7iSWqbwIFyLx
xA+YSW2q+++/sEC8EiLh87Vo2c71TYUI9eLSa2l+n/qEi/0hpK95+0FhclCLQ6Hh
z0H6GJPJ5hrrgGcUQokwvYrY/n1GgecTNyeWsrt+P5UbSZkryudh1gwchB5DFBDf
yX78hO8oGVh80CCvN2W205X8K5g/4BPMNQ6IKTKwOuuEtGYjfTlSQqSYSbMty6GL
VDpX2Zy7jilaS3aeG7huj34u6FgTbFca89Ada/+0bBGET0TfM6zzbv3+npVnrEXM
rftePKPP66s=
=vxHN
-----END PGP SIGNATURE-----
.
- Follow-Ups:
- Re: Power supplies in parallel for more current/same voltage?
- From: hhc314
- Re: Power supplies in parallel for more current/same voltage?
- From: Gerard Bok
- Re: Power supplies in parallel for more current/same voltage?
- From: CWatters
- Re: Power supplies in parallel for more current/same voltage?
- From: w_tom
- Re: Power supplies in parallel for more current/same voltage?
- Prev by Date: Re: Tek 545B Oscilloscope Free, Greater Boston Area Only
- Next by Date: Re: Shareware O-scope for use with National Instrmt DAQs?
- Previous by thread: Re: Tek 545B Oscilloscope Free, Greater Boston Area Only
- Next by thread: Re: Power supplies in parallel for more current/same voltage?
- Index(es):
Relevant Pages
|