Re: fuses on speakers

> hmmm, these ones I am using are a straight wire cap to cap, they are time
> delay types aswell, I guess there must be *something* different with
speaker
> fuses over normal fuses as they are silly money at that.

Fuses have resistance. Sometimes several Ohms. Compare with an 8 Ohm
speaker.


.

Relevant Pages

  • Re: using a multimeter.
    ... measure for *any* voltage. ... ohmmeter to the 200 ohms range, and touch the leads together to see ... You should still be reading tenths of an ohm, ... To test fuses, a good first check is to measure across the fuse on the ...
    (sci.electronics.basics)
  • Re: Did I just kill my new pinball game?
    ... I checked resistance across a few fuses and got 1-1.4 ohms. ... Fuses are ideally 0 ohms and should measure a few tenths of an ohm. ... Short your leads together to see if your meter reads zero... ...
    (rec.games.pinball)
  • Re: Hmm!
    ... "Trevor Wilson" ... They ranged from 12 Ohms up to 15 Ohms. ... ** That is an unbelievably high resistance value - not at all ... I checked a bunch of the fuses. ...
    (rec.audio.tubes)
  • Re: Head blowing fuses
    ... stop feeding it fuses and take advantage of the warranty. ... After replacing it and powering it ... I was thinking maybe the pre amp tube.... ... The head is rated 4 ohms and the cab is 16 ohms. ...
    (alt.guitar.amps)
  • Re: Hmm!
    ... "Trevor Wilson" ... They ranged from 12 Ohms up to 15 Ohms. ... ** That is an unbelievably high resistance value - not at all ... ** What is the brand of the fuses and where did you buy them? ...
    (rec.audio.tubes)