Re: Electronic thermostat
- From: Michael <nospam@xxxxxxx>
- Date: Mon, 27 Mar 2006 16:01:20 GMT
Mike Steward wrote:
I am looking for a cheap method of fitting some sort of thermometer to my
hot water tank which is heated from a log fire. The tank is built in to a
cupboard and very well insulated, therefore difficult to get at. I need
ideally some sort of digital read out in centigrade 0 to 100 deg.
The sensor would have to be on a cable about a metre long.
Any ideas ? Mike S.
Just the other day I saw a battery operated, indoor/outdoor thermometer for less
than US$10.00. Not sure where I saw it; maybe at BG Micro (Garland, Texas).
Don't remember whether or not it can read out in Celcius.
If I were doing it, I would use a microcontroller, an LCD, and a DalSemi/Maxim
DS1820 or DS1822 digital thermometer "chip" (because I've used all of them
before). As a matter of fact, several years ago I placed a DS1820 on the outlet
pipe of my (natural gas) water heater and ran the wires - 20+ feet of twisted
wire-wrap wire - to my livingroom, directly above, through an existing hole.
:-) The DS1820 and 1822 chips report temperature in Celcius, so you'd be all
set. (I wanted Fahrenheit, had to program the microntroller to convert.)
--
Michael
.
- Follow-Ups:
- Re: Electronic thermostat
- From: Mike Steward
- Re: Electronic thermostat
- References:
- Electronic thermostat
- From: Mike Steward
- Electronic thermostat
- Prev by Date: Q: What connector is this?
- Next by Date: Re: Electronic thermostat
- Previous by thread: Re: Electronic thermostat
- Next by thread: Re: Electronic thermostat
- Index(es):
Relevant Pages
|
|