Re: AT Miditower - LED MHz Display

Michael A. Terrell wrote:

http://www.belarc.com/free_download.html Download Belarc Advisor
and run it in Turbo mode to see what the turbo CPU speed is. It will
also show the normal CPU speed if you run it with turbo turned off.



Hi Michael!



I have tried it with BM, an old DOS util, showing in real time when
turbo-switch is activated or not.

The LED for the TURBO is going on and off, but nothing changes in
speed. ? ... Turbo LED seems to be rightly connected to the Mainboard.


Although, the 3-digit MHz LED Display shows nothing anymore. :-|
I have pulled out the Battery (tiny clock-battery) and have measured
about 200mV, falling.... and it's slightly corroded on the plus side.


I hope a new Battery will make the LED-Display run.



Kind Regards,

Daniel Mandic
.

Relevant Pages

  • Electrickery help
    ... Got a prob with the Turbo. ... Using the trusty Electrex faultfinderI can see that the regulator is outputting .7v on the Red/White output wire when it should be .2v and this is the likely cause. ... The culprit is supposed to be a bad connection from the Red/White wire to the + battery terminal. ... Bit of a general question but most bike charging systems seem very similar so I hope somebody can help. ...
    (uk.rec.motorcycles.classic)
  • Hitachi FD1094 low voltage limit?
    ... Checking out my Turbo Out Run to see if I need to change the battery on the FD1094 and it's at 3.01 volts. ... A passion for pinball! ...
    (rec.games.video.arcade.collecting)
  • Re: ath(4) driver problems with WEP...
    ... > up but ifconfig was barfing on anything more than 104 bits. ... Beware also that wicontrol displays WEP keys longer than 104 ... > FWIW I enabled turbo mode with: ...
    (freebsd-current)
  • Re: why does a Cd-Writer Take so much resources
    ... >Thats what I thought too until I tried my current gigabyte MB and to get ... >full dma you have to turn on turbo mode in bios....not sure if its actually ...
    (uk.comp.homebuilt)
  • Re: why does a Cd-Writer Take so much resources
    ... Thats what I thought too until I tried my current gigabyte MB and to get ... full dma you have to turn on turbo mode in bios....not sure if its actually ...
    (uk.comp.homebuilt)
Loading