Re: Purpose of the relay (6 Volt)



On 2007-01-21, JoJo <joseev@xxxxxxxxxxx> wrote:
I am experimenting on an older (1955) motor scooter that operates on a
6 volt AC magneto. I want to install a 6 volt AC horn. My question is:
Do I need a 6 volt automotive horn relay to produce sufficient punch to
power the AC horn? Is the purpose of the relay to muster enough voltage
to power the horn on demand?

Thanks much for the education you may provide.

In an automobile the relay is used to simplify wiring,
the power requirements of a horn are not particularly spectacular.

Bye.
Jasen
.



Relevant Pages

  • Re: Purpose of the relay (6 Volt)
    ... I want to install a 6 volt AC horn. ... Do I need a 6 volt automotive horn relay to produce sufficient punch to ... power the AC horn? ...
    (sci.electronics.misc)
  • Re: Purpose of the relay (6 Volt)
    ... I want to install a 6 volt AC horn. ... Do I need a 6 volt automotive horn relay to produce sufficient punch to ... power the AC horn? ...
    (sci.electronics.misc)
  • Re: Purpose of the relay (6 Volt)
    ... I want to install a 6 volt AC horn. ... Do I need a 6 volt automotive horn relay to produce sufficient punch to ... power the AC horn? ...
    (sci.electronics.misc)
  • Re: Purpose of the relay (6 Volt)
    ... I want to install a 6 volt AC horn. ... Do I need a 6 volt automotive horn relay to produce sufficient punch to ... If you just had the switch, you'd have to bring the higher current wire ...
    (sci.electronics.misc)
  • Re: Help for Uber Newbie - GPS trigger
    ... notify by e-mail that there is an alarm situation. ... Someone mentioned this may be possible with an RC circuit. ... RC and a relay, so this circuit is designed with that in mind. ... The + and Gnd come from the horn relay. ...
    (sci.electronics.design)

Loading