Re: pins, cables

From: Peter Bennett <peterbb@xxxxxxxxxxxxxxxxx>
Date: Sun, 11 Nov 2007 10:07:46 -0800

On 11 Nov 2007 02:02:01 -0500, Allan Adler <ara@xxxxxxxxxxxxxxxxxxxx>
wrote:

Radio Shack sells a crimping tool for about $39. Will it do the job?

Officially, you need the right crimp tool for the specific contact you
are using - however, depending on the contact, and the assembler's
skill, you can often "make do" with the wrong tool, and/or solder.

--
Peter Bennett, VE7CEI
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca
.

Follow-Ups:
- Re: pins, cables
  - From: Wim Lewis

References:
- pins, cables
  - From: Allan Adler
- Re: pins, cables
  - From: John Fields
- Re: pins, cables
  - From: Allan Adler

Prev by Date: Re: pins, cables
Next by Date: Re: pins, cables
Previous by thread: Re: pins, cables
Next by thread: Re: pins, cables
Index(es):
- Date
- Thread