Re: Request Interconnection Diagram for Curtis 1203 24VDC Motor Controller

From: Wild Bill (kwag98_at_usachoice.net)
Date: 06/13/04 

Date: Sat, 12 Jun 2004 21:29:53 -0400

Sorry, I don't have it either. I was gonna mention that the 1205 diagram is
at an eBay seller's website, but you've stated that the '03 is different.

The eBay seller I mentioned (don't know his seller name, he's on the west
coast I think) is selling quite a few of the '05s and other Curtis products,
as well as a lot of bicycle parts.. so you might look him up and ask if he's
got the diagram for the '03

Cheers
WB
.................

"GerryO" <gerryogrady@shaw.ca> wrote in message
news:OQNyc.739492$oR5.562275@pd7tw3no...
> 12 June 2004 5:56 PM
>
>
> I am looking for the basic external hook-up diagram for the 1203 PMDC
motor
> controller. It has the B+ and B- ,M+ and M- which are quick disconnects
and
> probably self explanatory, along with two individual sets of square male
> pins which I am having difficulty in figuring out. The first male set has
> two pins and the second male set has 6 pins. I am assuming this
controller
> came from a mobility aid scooter. Therefore braking and speed control
pots
> etc were to be used on these pins. Confirmation via diagram /email or web
> link as to what is connected to where would be greatly appreciated.
>
> PS : Curtis wants to sell me a new controller as their listings on the
web
> start at 1204/1205 and are dissimilar from the 1203.
>
> Cheers..Gerry
>
>

Relevant Pages

  • Re: drawing schematic from data sheet
    ... sheet doesn't provide the "schematic diagram". ... Also PeteS, what is a.b.s.e, how to get access to it? ... if you do more than a few pins on a part, ...
    (sci.electronics.design)
  • Re: Transistor Orientation woes ?
    ... >> the diagram shows me the LED just comes on and stays on. ... > You should be looking at the flat side, pins down for the EBC order. ... >> the transistor by the pins. ...
    (sci.electronics.basics)
  • Re: New person to CPLD programming
    ... I think that I might have not defined the word 'pins' properly in my ... I'm referring to the diagram on screen (the graphical layout) ...
    (comp.arch.fpga)
  • Re: drawing schematic from data sheet
    ... sheet doesn't provide the "schematic diagram". ... Also PeteS, what is a.b.s.e, how to get access to it? ... if you do more than a few pins on a part, ...
    (sci.electronics.design)
  • Re: Lahman, how ya doing?
    ... Straightforward diagram right out of a control theory text. ... Normally Controller would be sent a control event, and would then get a temperature and sample time from Thermometer and calculate a control action. ... But if it had previously received a delay event, it would send a control event to Controller on the next tick. ... When I saw the diagram I thought you were going to suggest that the event that triggers Controller is generated by Thermometer rather than Timer. ...
    (comp.object)